Wing - Right Fuel Tank

2004-08-20 - Assembling the fuel tank (drill ribs, fit tank). (3.5 Hrs).

Drilled the ribs, and fit the tank assembly to the wing.

There is no gap between the tank skin and the leading edge skin.
There is a slight mis-match along the bottom edge between the tank skin and the LE skin on the bottom of the wing (ain't no big thang).
Tank bolted to the spar, all bolts aligned nicely.
I'm not too happy with the Z-bracket on the end. The bolts are pretty close to the edge, but it's probably ok.
Ribs cleco'ed to the tank skin and rear baffle, and everything assembled. Fits real good.