Wing - Fiberglass
Finished the right wing tip, and moved it to the storage platform. All I had left to do was to install the rib at the rear of the wing tip.
|The position of the rib is marked. As you can see, the rib has to be inside of the nutplates.|
|The holes were drilled in the wing tip, then the center-line of the rib was marked, and the rib was match-drilled to the wing tip.|
|The wing tip is countersunk for the rib.|
|This rib was deburred and riveted to the wing tip.|
|All done with the right wing tip.|
|Moving the wing to the storage platform. The little dolly works great.|